Took the various screws off that secures the trunk inner lid. I’m going to need to find replacement screws that are a bit larger in diameter. EDIT: I picked up all the hardware I needed at the local ACE store. I made sure to locktite 8-32 bolts I used for the trunk lock hooks. I also used lock nuts, I learned from the past fails trying to fix the original problem.

The original lid had a lot of damage. I found it was missing other areas on the lid.

The lower corner section on both sides of the cover was completely gone.

One thing that was unexpected was having to reuse the rubber seal that goes around the lid. Mine was in good shape for reuse. I’ll probably use some sealant to keep in place, just a few tacks around lid to keep it in place.