It’s time for my maintenance oil change. As always I get everything from Wing Stuff because of the pricing and convenience.
The current mileage logged is 32,350 miles. My current ride commute and frequency is racking up crazy miles per year.
As far as tools go it’s the bare minimum. I use a couple 3/8 sockets, a 12mm and 8mm. These are used to remove the 3 drain plugs and clutch filter cover. A oil filter wrench is also used.
For whatever removing the oil filter was more difficult than usual. It took several good attempts.
The amount of oil used was 4.9 gallons. This was a measured procedure, using a measuring cup I removed 0.1 ounces from a quart of oil and poured in the remaining oil.
EDIT: I found this oil filter removal tool that has positive comments. I currently have 2 but both have its own issues under certain conditions. I’m going to order one and see if it is better than the cup tool I currently have.
